With double the processing power, models and effects of competitive modeling amplifiers, the VYPYR dramatically redefines the power and scope of modern guitar amplification. VYPYR amplifiers are based on powerful 32-bit, floating-point SHARC processors that enable highly detailed, accurate modeling as well as vastly enhanced flexibility and features than ever before available in guitar amplification.Featuring 24 amp channel models-both the clean and distorted channels of 12 popular amps for the first time anywhere-plus 11 editable preamp “stomp box” effects and 11 editable post-amp “rack” effects with dual-parameter control. Players can use up to five effects simultaneously. When used with the optional Peavey Sanpera foot controller, the possibilities further expand from 12 in-amp presets to 400 programmable presets, with an on-board looper and more. The VYPYR also acts as its own computer audio interface, with a built-in studio-quality USB 2.0 output on most models that is recognized by computers as an audio device. The entire six-model VYPYR Series features the easy-to-use Peavey WYSIWYG (What You See Is What You Get) interface.

From the Joe Satriani series, the Peavey JSX Mini Colossal Guitar Amp is a great answer to the question of how to get great tube sound out of a small combo amplifier at manageable volumes. The feature that makes it happen is Peavey’s trademarked Power Sponge: a unique control that allows the user to adjust the nominal output power level of the amplifier. It can be used in conjunction with the volume control to attain infinite combinations of power amp and preamp distortion at any volume level. This control DOES NOT affect the level of the Microphone Simulated Recording output and provides an appropriate load to the amplifier at all settings.Speaker outputs are provided as paralleled 1/4″ mono tip-sleeve jacks for the connection of speaker enclosures. Minimum speaker impedance is 4 Ohms. You set the cabinet Impedance Selector switch to match the load of the speaker cabinet(s). The internal speaker is 8 Ohms.A recording out XLR jack is used to route a Microphone Simulated signal (tapped directly from the speaker being used) from the amplifier to an external recording device or PA. It uses a 100% passive circuit to avoid clipping, noise, and other shortcomings of solid-state circuitry. An 8″ speaker is specially voiced to get the absolute best tone out of this combo, whether you’re playing clean, crunchy, or full-on distortion.Peavey hasn’t forgotten good looks, either. A stylish black housing is set off by a classic jeweled power light and chrome-plated brass control knobs.”The JSX Mini Colossal Combo is a Class A monster in a nice little box. It has a pure, wide-open sound, classic tremolo, buffered effects loop, a unique power level attenuator, and a recording output that actually sounds like the amp. Together with a specially voiced 8″ speaker, the 5W Mini Colossal has a vintage tone that really rocks. It can run clean, crunchy, or, down and dirty. Its unique design makes it easy to get a good tone fast, and its size makes it very practical. Whether practicing, recording, or, even playing a small gig, this lively little amp really sounds great.” Joe SatrianiMade in the USA.

With double the processing power, models and effects of competitive modeling amplifiers, the VYPYR dramatically redefines the power and scope of modern guitar amplification. VYPYR amplifiers are based on powerful 32-bit, floating-point SHARC processors that enable highly detailed, accurate modeling as well as vastly enhanced flexibility and features than ever before available in guitar amplification.Featuring 24 amp channel models-both the clean and distorted channels of 12 popular amps for the first time anywhere-plus 11 editable preamp “stomp box” effects and 11 editable post-amp “rack” effects with dual-parameter control. Players can use up to five effects simultaneously. When used with the optional Peavey Sanpera foot controller, the possibilities further expand from 12 in-amp presets to 400 programmable presets, with an on-board looper and more. The VYPYR amp also acts as its own computer audio interface, with a built-in studio-quality USB 2.0 output on most models that is recognized by computers as an audio device. The entire six-model VYPYR Series features the easy-to-use Peavey WYSIWYG (What You See Is What You Get) interface.

At the heart of the all-tube Peavey ValveKing 112 Combo Amp is a patent-pending, Class A/B Texture control that allows variable selection and combinations of Class A and Class AB power structures. The Texture knob lets you coax a wide range of tones out of this amplifier. It features 12AX7 preamp and 6L6GC power amp tubes; a specially voiced 12″ ValveKing speaker; 2 footswitchable channels with independent 3-band EQ and volume; footswitchable boost on the lead channel (with optional footswitch); global reverb control; a buffered effects loop; and external speaker jack.

The Windsor Tube Amp Head employs three 12AX7 preamp tubes and four EL34 power-amp tubes in a single-channel configuration to deliver 100W of the sound of rock’s golden era with exclusive Peavey technology and reliability. While most amplifiers leave the EQ to the preamp section, the Windsor features Peavey’s patented Presence and Resonance controls, which adjust speaker damping from tight to loose in the high and low frequency ranges, respectively. The Windsor also offers Peavey’s patent-pending Texture™ circuitry for adjusting the response characteristics from modern Class A/B push-pull to vintage Class A sounds. The Texture control provides incremental adjustment for an incredible range of tone texturing and coloring.The Windsor also features a footswitchable gain boost, three-band rotary EQ on the preamp, master volume, footswitchable effects loop and high and low inputs.

At the heart of the all-tube Peavey ValveKing 212 Combo Amp is a patent-pending, Class A/B Texture control that allows variable selection and combination of Class A and Class AB power structures. This gives you the ability to coax a wide range of tones out of the ValveKing 212. This Peavey amp features 12AX7 preamp and 6L6GC power amp tubes; specially voiced 12″ ValveKing speakers; 2 footswitchable channels with independent 3-band EQ and volume; footswitchable boost on the lead channel; global resonance, presence, and reverb controls; a buffered effects loop; and dual speaker jacks in parallel.

With double the processing power, models and effects of competitive modeling amplifiers, the VYPYR amp dramatically redefines the power and scope of modern guitar amplification. VYPYR amplifiers are based on powerful 32-bit, floating-point SHARC processors that enable highly detailed, accurate modeling as well as vastly enhanced flexibility and features than ever before available in guitar amplification.Featuring 24 amp channel models-both the clean and distorted channels of 12 popular amps for the first time anywhere-plus 11 editable preamp “stomp box” effects and 11 editable post-amp “rack” effects with dual-parameter control. Players can use up to five effects simultaneously. When used with the optional Peavey Sanpera foot controller, the possibilities further expand from 12 in-amp presets to 400 programmable presets, with an on-board looper and more. The VYPYR also acts as its own computer audio interface, with a built-in studio-quality USB 2.0 output on most models that is recognized by computers as an audio device. The entire six-model VYPYR Series features the easy-to-use Peavey WYSIWYG (What You See Is What You Get) interface.

The Peavey 6505 Plus 120W Guitar Amp Head is great for hardcore or metal bands. 6 – 12AX7s in the preamp add up to even more terrifying punch and mind-rattling gain. Includes footswitchable lead/rhythm channel select, effects loop, 3-band EQ, plus resonance and presence controls on each channel. Rhythm channel includes pre/post gain controls and bright/crunch switches. Lead channel includes pre/post gain controls only. Preamp output. Footswitch included. 4, 8, or 16 ohms.The 6505 Series guitar amplifiers are named in celebration of Peavey’s first 40 years, (1965-2005.) While known as the 5150 Series, these amps became the undisputed go-to guitar amps for scores of rock, hardcore, and metal bands because of their raw tone, relentless power, and road-proven reliability.Made in the USA.

Peavey redesigned their renowned Classic Series guitar amplifiers, and the new Classic 30 Head features four EL84s and three 12AX7s, footswitchable reverb and 3-band EQ. The Classic 30 Head is a perfect match for the Classic 212 Cabinet.Made in the USA.

The Peavey 6505 Plus 120W Guitar Amp Head is great for hardcore or metal bands. 6 – 12AX7s in the preamp add up to even more terrifying punch and mind-rattling gain. Includes footswitchable lead/rhythm channel select, effects loop, 3-band EQ, plus resonance and presence controls on each channel. Rhythm channel includes pre/post gain controls and bright/crunch switches. Lead channel includes pre/post gain controls only. Preamp output. Footswitch included. 4, 8, or 16 ohms.The 6505 Series guitar amplifiers are named in celebration of Peavey’s first 40 years, (1965-2005.) While known as the 5150 Series, these amps became the undisputed go-to guitar amps for scores of rock, hardcore, and metal bands because of their raw tone, relentless power, and road-proven reliability.Made in the USA.